Hockenhall

This gorgeous block floor is from the Ted Todd range of sustainable engineered oak flooring.

For years we have been fitting their floors and started off with the Parkhurst in a board form, available in wide boards 180mm or 220mm by 20mm thickness.  So a good substantial board.  The look and finish has proved to be so popular that the block followed

Fitting of blocks must be onto a very good clean, dry subfloor – if any preparation is required ATC are happy to do this work – it is required for a block floor

Fitted in the traditional herringbone pattern, as on photograph.  The finish is a lovely, warm natural look on the face of the blocks with a darkened edge.  All finished in hardened oil and given a brushed treatment.  On display in both Monmouth and Cheltenham

Fitting of blocks is more complicated than boards and best to use an expert

The floor can be edged with a single or double border or allowed to flow (our favourite) straight under the skirting.  We also advise removing and refitting or undercutting skirtings.

You could combine blocks and boards in different rooms throughout the house.  If you need any advise on fitting, design or finishes please pop into either the Monmouth or Cheltenham Showrooms